Philips sonicare ProtectClean HX6819/05 Manual page 30

English
Using your Philips Sonicare
Brushing instructions
1 Press the brush head onto the handle in
such a way that the bristles will face the
front of the handle.
2 Firmly press the brush head down onto
the metal shaft until it stops.
Note: It is normal to see a slight gap
between the brush head and the handle.
3 Wet the bristles.
4 Apply a small amount of toothpaste on
the bristles.
5 Place the toothbrush bristles against
the teeth at a slight angle (45 degrees),
pressing firmly to make the bristles reach
the gumline or slightly beneath the
gumline. A change in vibration (and a
slight change in sound) alerts you when
you apply too much pressure while
brushing.
Note: Keep the center of the brush in
contact with the teeth at all times.
29