Table of Contents
Advertisement
Before using for the first time
en
KBefore using for the first
time
B efore you can use your new appliance, you must
B e f o r e u s i n g f o r t h e f i r s t t i m e
make some settings. You must also clean the cooking
compartment and accessories.
Before using for the first time
Before using the appliance for the first time, ask your
water supplier about the hardness of your tap water.
To ensure that the appliance can reliably remind you to
descale it when required, you must set your water
hardness range correctly.
Caution!
The appliance may become damaged due to the
■
use of unsuitable liquids.
Do not use distilled water, highly chlorinated tap
water (>40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or
non-carbonated mineral water.
Malfunctions may occur when using filtered or
■
demineralised water.
The appliance may request that you top up the water
tank even though it may be full, or operation with
steam is cancelled after approx. two minutes.
If required, mix filtered or demineralised water with
the bottled non-carbonated mineral water with a ratio
of one to one.
Notes
If your water is very hard, we recommend that you
■
use softened water.
If you only use softened water, you can set the water
■
hardness range to "softened".
If you use mineral water, set the water hardness
■
range to "4 very hard".
If you use mineral water, you must only use non-
■
carbonated mineral water.
Water hardness range
0
1 (up to 1.3 mmol/l)
2 (1.3 - 2.5 mmol/l)
3 (2.5 - 3.8 mmol/l)
4 (above 3.8 mmol/l)
Initial use
After connecting the appliance to the power or following
a power cut, the settings for initial use are shown in the
display.
You can change these settings at any time in the
Note:
basic settings. ~ "Basic settings" on page 18
Setting the language
German is the preset language.
Use the rotary selector to select the required
1.
language.
14
Setting
0 softened
1 soft
2 medium
3 hard
4 very hard
Touch the
arrow.
¿
2.
The next setting appears.
Setting the time
The time starts at 12:00.
Use the rotary selector to set the current time.
1.
Touch the
arrow
¿
2.
Setting the date
The default date is 1.1.2014.
Always touch the
¿
1.
setting.
Use the rotary selector to set the current day, month
2.
and year.
Setting the water hardness
The default water hardness setting is "very hard".
Set the hardness using the rotary selector.
1.
Touch the
arrow.
¿
2.
A note appears on the display confirming that the
initial use has been completed.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment without anything in it and with the
oven door closed.
Remove the accessories from the cooking
1.
compartment.
Remove any leftover packaging, such as polystyrene
2.
pellets, from the cooking compartment.
Before heating the appliance, wipe the smooth
3.
surfaces in the cooking compartment with a soft,
damp cloth.
Press the on/off button to switch on the appliance.
4.
Fill the water tank. ~ "Filling the water tank"
5.
on page 20
Set the specified type of heating, temperature and
6.
steam injection, then start the appliance.
Settings
Type of heating
4D hot air
Temperature
Maximum
Cooking time
1 hour
Keep the kitchen ventilated while the appliance is
7.
heating.
Use the on/off button to switch off the appliance
8.
once the specified time has elapsed.
Wait for the cooking compartment to cool down.
9.
Clean the smooth surfaces with soapy water and a
10.
dish cloth.
Empty the water tank and dry the cooking
11.
compartment. ~ "After every steam operation"
on page 21
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
arrow to move to the next
:
with added steam ("high")
Advertisement
Table of Contents
