Philips sonicare ProtectClean HX6403/70 Manual page 41

Battery status and charging
Battery status (when handle is not on charger)
1 Put the plug of the charger in an
electrical outlet.
2 Place the handle on the charger.
- The charger will emit 2 short beeps
to confirm that the handle is placed
properly.
- The flashing light of the battery level
indicator shows that the toothbrush is
charging.
- When handle is fully charged on the
charger, the battery light shows solid
green for 30 seconds and switches off.
Note: Your toothbrush comes pre-charged
for first use. After first use, charge for at least
48 hours.
When removing the Philips Sonicare from
the charger, the battery light at the bottom
of the toothbrush will indicate the status of
the battery life.
- Solid green LED: full battery
- Flashing green LED: medium battery
- Flashing amber LED and three beeps:
low battery
- Flashing amber LED and two sets of five
beeps: No brushing sessions left (charge
toothbrush)
40
English