Philips sonicare ProtectClean HX6403/70 Manual page 34

English
3 Wet the bristles.
4 Apply a small amount of toothpaste on
the bristles.
5 Place the toothbrush bristles against
the teeth at a slight angle (45 degrees),
pressing firmly to make the bristles reach
the gumline or slightly beneath the
gumline. A change in vibration (and a slight
change in sound) alerts you when you
apply too much pressure while brushing.
Note: Keep the center of the brush in
contact with the teeth at all times.
6 Press the power on/off button to turn on
the Philips Sonicare.
7 Gently keep the bristles placed on the
teeth and in the gumline. Brush your
teeth with small back and forth motion
so the bristles reach between the teeth.
Note: The bristles should slightly flare. Do
not scrub.
33