Control Panel; Operating From The Control Panel - Black & Decker BPP06WTB Manual

SET UP & USE

CONTROL PANEL

Sleep
Indicator light
Timer Indicator Timer
Light Button
Pictures are for illustration purpose only. Your model may or may not have all the features.

OPERATING FROM THE CONTROL PANEL

The Control Panel enables you to manage all the main functions of the appliance,
but to fully exploit its potential, you must use the remote control.
TURNING THE APPLIANCE ON
• Plug into the dedicated electrical outlet.
• Press the button until the appliance comes on. The last function active when
it was turned off will appear.
* Never turn the air conditioner off by unplugging from the outlet. Always press
the button , then wait for a few minutes before unplugging. This allows the
appliance to perform a cycle of checks to verify operation.
Note: Before pressing Power On button make sure the condensate drain plug in
the rear of the unit is securely in place to avoid any leaking.
• Press the MODE
lights up.
Select Mode Indicator Lights
Heat models BPP08HWTB
and BPP10HWTB only
Mode Decrease
Selection Temperature
Button Button
button until the light corresponding to the required Mode
COOL DEHUMIDIFY
Swing Indicator Light
Fan Speed
Indicator
Lights
Display
Area
Fan Speed
Increase
Selection
Temperature
Button
Button
FAN
Heat models
BPP08HWTB and
BPP10HWTB only
FULL Tank
Indicator
Light
Power
Button
HEAT
Page 13
ENGLISH