Table of Contents
Advertisement
en Childproof lock
10.3 Preparing food for the programme
Use fresh and, ideally, chilled food.
Weigh the food.
1.
The weight of the food is required in order to cor-
rectly set the programme.
Add the food to the cookware.
2.
Place the cookware onto the wire rack.
3.
Always place the cookware into the cooking com-
partment while it is cold.
10.4 Setting a programme
The appliance selects the optimal type of heating, tem-
perature and cooking time. All you need to do is set
the weight.
Notes
¡ You can set the weight only in the intended area.
¡ After the programme starts, you can no longer
change the programme and the weight.
Use the function selector to set Programme .
1.
The temperature selector must remain in the "Off"
2.
position .
11 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
Note: You can go to the basic settings → Page 14 to
specify whether you want the option to set the child-
proof lock.
12 Basic settings
You can configure the basic settings for your appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Signal duration upon completion of a time or
timer period
Waiting time until a setting is applied
Button tone when pressing a button
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
14
Use the
or button to set the required pro-
3.
gramme.
Press the
button.
4.
Use the
or
button to set the weight of your
5.
food. Always set the next higher weight.
The display shows the calculated cooking time.
‒
The cooking time cannot be changed.
For some programmes, the
‒
used to delay the end.
→ "Setting the end time", Page 12
To change the programme, press the
‒
ton.
a After a few seconds, the programme starts and the
cooking time counts down.
a If the programme has ended, an audible signal
sounds and the display shows the cooking time as
zero.
When the programme ends:
6.
Press any button to end the audible signal pre-
‒
maturely.
To set a cooking time for further cooking, press
‒
the
button. The appliance continues to heat
using the programme settings.
When your food is ready, switch off the appli-
‒
ance.
11.1 Activating and deactivating the
childproof lock
Requirement: The function selector must be set to the
"Off" position .
To activate the childproof lock, press and hold the
▶
button until
To deactivate the childproof lock, press and hold
‒
the
button until
Selection
= 10 seconds
1
= 30 seconds
= 2 minutes
1
= 3 seconds
= 6 seconds
= 10 seconds
= off
1
= on
button can be
appears in the display.
goes out in the display.
but-
Advertisement
Table of Contents
