Table of Contents
Advertisement
Hygiene Intense function
(depends on the model)
Designed to be used when more hygiene
is required for washing the dishes. This
function increases the washing and rinsing
temperatures in the selected cycle and
extends the periods of these steps in the
cycle. Moreover, an additional rinsing cycle
is performed to wash and rinse your dishes
with more hygiene.
Deep Wash function
(depends on the model)
A A
basket as per the selected program.
Deep Wash Do not attempt to remove
the impeller part!
Selecting this function extends the
program period.
The program may be used as Pot
Washing or Bottle Washing functions
as per your selection.
TrayWash Function
(depends on the model)
Select Intensive 70°C programme and
press function key to run this function.
AquaActive Function
(Depends on model)
This function operates the lower impeller
with a higher pressure and higher speed to
enable a better washing for dishes such as
pans and trays with stubborn, dried soiling.
The Bottle/Pot washing
impeller (A) under the
lower impeller allows
better washing of your
bottles and dishes with
intense dirt that are
placed on the right-
hand side of the lower
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
Inner Illumination
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
Changing the interior lighting
setting
1. After turning on your machine, press
and hold the Time Delay and Start /
Pause / Cancel key for 3 seconds.
2. Press the Time Delay key to switch the
delay indicator to position 9.
3. You can press the function keys to
turn on and off the inner illumination.
The inner illumination is switched to
off position if the 1st programme LED
is on, and to the on position if the 2nd
programme LED is on.
4. Press the On/Off key to exit the
settings menu. Your setting will be
saved automatically.
SelfDry
(Depends on the Model)
Thanks to the "SelfDry" feature on your
machine, the drying effectiveness of your
machine is improved and power is saved.
There are two options, namely "OFF" and
"ON".
You may use sub-menu settings to change
"SelfDry" settings.
33/EN
Advertisement
Table of Contents
