6. Orient the Storage Latch (77) as shown. Attach
the Storage Latch to the left Upright (76) with
two #10 x 1" Tek Screws (7); start both Tek
Screws, and then tighten them.
7. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or car-
pet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight.
Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see
pages 19 and 20). Note: Extra parts may be included.
6
77
7
9
76