ICON Health & Fitness PRO-FORM CADENCE LT User Manual page 8

3. Attach the Left and Right Handrails (71, 72) to
the Uprights (76) with four M10 x 45mm Screws
(2); start all four Screws, and then tighten
them.
4. With the help of a second person, hold the con-
sole assembly (A) near the Uprights (76).
Insert the Upright Wire (78) and Console Ground
Wire (96) through the looped tie (B) on the back
of the console assembly (A).
Then, connect the Upright Wire (78) to the
console wire (C). The connectors should slide
together easily and snap into place with an
audible click. If they do not, turn one connec-
tor and try again.
Connect the Console Ground Wire (96) to the
ground wire (D) from the console.
5. Attach the console assembly (A) to the Left and
Right Handrails (71, 72) with four M4.2 x 19mm
Screws (3); start all four Screws, and then
tighten them. Be careful not to pinch the
wires.
Next, insert the connectors on the wires (C, 78)
into the console assembly (A). Pull the tie (B)
tight around the Upright Wire (78) and Console
Ground Wire (96). Then, cut off the end of the
tie.
3
2
4
D
96
78
5
B 96
C
78
3
72
8
71
72
2
76
A
C
B
76
A
3
71