Table of Contents
Advertisement
Quick Links
Instruction Manual
USB 2.0 to eSATA Adapter / Converter
USB2ESATA
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x Driver CD
• 1 x Instruction Manual
• 1 x USB to eSATA Adapter
System Requirements
• A Desktop or notebook PC with an available USB 2.0 port
• Windows®2000/XP/Vista™/7, Linux, Mac OS 10 or higher
• Power supply for your SATA/eSATA device
• eSATA to SATA cable (for SATA drive), or eSATA to eSATA cable (for
eSATA enclosure)
Specifications
Maximum Data
Transfer Rate
Operating System
Support
Connector Types
Hardware Installation
Please ensure that any important data from the SATA or eSATA
device is backed up prior to connecting this adapter.
With the computer powered down:
1. Prepare an eSATA to eSATA or eSATA to SATA cable for your SATA device.
2. Connect the SATA device to one end of the SATA cable. Connect
the other end of the SATA cable to the USB2ESATA eSATA port.
3. Connect the eSATA device to the required power adapter (as
determined by the device), and then turn the power on.
4. Switch on your computer. The operating system should detect
this new device and automatically install the appropriate driver.
For the most up-to-date information, please visit: www.startech.com
480Mbps
Windows® 2000/XP/2003/Vista™ /7 /
Mac OS X and higher
1 x SATA Data 7 pin Male
1 x USB A Male
Driver Installation
Please note that if you are using this device on a computer running
Windows® 2000/XP/Vista™, Linus or Mac OS 10 or higher, no further
driver installation is required, as USB2ESATA is natively supported by
these operating systems.
*actual product may vary from photos
Manual Revision: 01/19/2012
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for StarTech.com USB2ESATA
Summary of Contents for StarTech.com USB2ESATA
- Page 1 Transfer Rate driver installation is required, as USB2ESATA is natively supported by Operating System Windows® 2000/XP/2003/Vista™ /7 / these operating systems. Support Mac OS X and higher 1 x SATA Data 7 pin Male Connector Types 1 x USB A Male Hardware Installation Please ensure that any important data from the SATA or eSATA device is backed up prior to connecting this adapter. With the computer powered down: 1. Prepare an eSATA to eSATA or eSATA to SATA cable for your SATA device. 2. Connect the SATA device to one end of the SATA cable. Connect the other end of the SATA cable to the USB2ESATA eSATA port. 3. Connect the eSATA device to the required power adapter (as determined by the device), and then turn the power on. 4. Switch on your computer. The operating system should detect this new device and automatically install the appropriate driver. For the most up-to-date information, please visit: www.startech.com Manual Revision: 01/19/2012...
- Page 2 • Consult the dealer or an experienced radio/TV technician for help. Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Need help?
Do you have a question about the USB2ESATA and is the answer not in the manual?
Questions and answers