Appliance Door; Removing The Door Cover - Siemens HM656GN 1B Series Instruction Manual

Use the hook to attach the rear holder into the upper
3.
hole and push it into the lower hole
‚
Attaching the rails
When hanging the rails, ensure that the sloping edge is
at the top of the rail.
The rails only fit on the right or the left side. The pull-out
rails must pull out forwards.
Mount the rear of the frame at the top and bottom
1.
and pull it forwards
ƒ
Then insert it at the front
2.
(fig. ).
"
(fig.
ƒ
#
(fig. ).
!
‚ and push it down
qAppliance door
).
With good care and cleaning, your appliance will retain
A p p l i a n c e d o o r
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the

appliance door.

Removing the door cover

The stainless-steel inlay in the door cover may become
discoloured. To carry out thorough cleaning, you can
remove the cover.
Open the appliance door slightly.
1.
Press on the right and left side of the cover (fig.
2.
Remove the cover (fig.
3.
Close the appliance door carefully
‚
ƒ
Clean the stainless-steel inlay in the cover with
Note:
a stainless-steel cleaning agent. Clean the rest of the
door cover with soapy water and a soft cloth.
Open the appliance door again slightly. Put the
4.
cover back in place and press on it until it clicks
audibly into place (fig.
Close the appliance door.
5.
Appliance door
).
"
).
#
en
).
!
23