Table of Contents
Advertisement
Positioning and connecting
en
Transportation
e.g. when moving home
Preparatory work:
Turn off the water tap.
1.
Reduce the water pressure in the
2.
supply hose. ~ Page 42
Drain any residual water.
3.
~ Page 41
Disconnect the appliance from the
4.
mains.
Remove the hoses.
5.
Empty the dispensers.
6.
~ "Detergent drawer and housing"
on page 40
Installing the transport locks:
Remove the covers and keep them
1.
in a safe place.
Use a screwdriver if
Note:
necessary.
Insert all four sleeves.
2.
20
a) Clip the mains cable securely in
the holders.
b) Insert and tighten the screws.
c) Clip the hoses securely in the
holders.
Before switching on the appliance
again:
Notes
The transport braces must be
■
removed.
~ "Removing the transport locks"
on page 14
Pour approx. 1 litre of water into
■
dispenser II, select the Empty
programme and start.
This will prevent detergent from
flowing straight into the drain during
the next wash.
Advertisement
Table of Contents
