NETGEAR WG311v3 Reference Manual page 20

Reference Manual for the NETGEAR 802.11g Wireless PCI Adapter WG311v3
Configure your WG311v3 and save the
Profile.
a. Click the system tray icon to open the
WG311v3 Smart Wizard Wireless
Assistant.
The Settings page opens.
b. Change the Network Name SSID to
match your network.
Tip: Instead of typing in the SSID, you
can use the Network tab to view the
available wireless networks.
Double-click on the desired network.
c. Click Apply to activate the connection.
d. Enter a name for your profile and click
Save Profile to store the current
settings.
Tip: If you use your notebook PC to
connect to a wireless network at work
and at home, create profiles called
work and home.
Note: This procedure assumes your
wireless network is not using security.
If your wireless network uses WEP or
WPA-PSK, set up your WG311v3
accordingly. To view the wireless
security settings help, click the Help
button.
2-6
Wireless Assistant Settings Tab page
Note: The NETGEAR default settings are
Infrastructure mode, with ANY for the wireless
network name SSID, and WEP disabled.
Basic Setup