Configuration And Setup; Installing The Handle - Black Box NBC26S-R2 Manual

Chapter 4: Configuration and Setup

4.0 Configuration and Setup

Remove and discard all packaging materials and then lock the lockable casters.
Open and inspect the NBC to verify all doors, locks, and casters are working properly.
Do not plug the NBC into an outlet until all configurations and setup are complete.

4.1 Installing the Handle

It is possible to install the handle/cord wrap on either side of the NBC. Black Box
recommends that you mount the handle on the side of the cart with the locking
swivel casters.
NOTE: The casters swivel on one side of the NBC and are fixed on the other. Consider
maneuverability options before installing the handle.
Step 1. Locate the side of the cart with the locking swivel casters.
Handle
See "Detail A",
next page
Locking Swivel Casters
Figure 4-1. Handle installation.
Page 8
724-746-5500 | blackbox.com
NBC20S-R2