Configuration And Setup; Installing The Handle - Black Box LCC30H-A User Manual

Chapter 4: Configuration and Setup

4. Configuration and Setup

Remove and discard all packaging materials and then lock the lockable casters.
Open and inspect the Cart to verify all doors, locks, and casters are working properly.
Do not plug the Cart into a wall outlet until all configurations and setup are
complete.

4.1 Installing the Handle

The handle installs on the the side of the cart with the locking swivel casters.
NOTE: The casters swivel on one side of the Cart and are fixed on the other.
Consider manueverability options before installing the handle.
Step 1: Locate the side of the Cart with the locking swivel casters.
Step 2: Place the handle so that the holes in the brackets are aligned with the
threaded holes in the side panels.
Step 3. Using a Phillips-head screwdriver, tighten two of the Phillips screws into
the threaded holes.
Page 10
Handle
Figure 4-1. Installing handle.
724-746-5500 | blackbox.com
Threaded holes
LCC30H-A