Inserting Dividers Into The Cart - Black Box NBC26S-R2 Manual

Chapter 4: Configuration and Setup

4.3 Inserting Dividers Into the Cart

Step 1. Beginning with the top row, insert a divider into the cart.
NOTE: This version of the cart provides additional divider slots to allow the user to
customize the size of the storage slots.
Figure 4-13. Begin to insert dividers into the top row of the cart.
Step 2. Then from the back of the cart, insert the power brick plugs hanging from
the dividers on the left side of the cart into the power receptacles located on the
bottom left of the cart. Repeat with the power brick plugs on the right side of the
cart into the power receptacles located on the bottom right of the cart.
Figure 4-14. Netbook Cart dividers with attached power bricks.
Step 3. Plug the power cord from the bottom left receptacles into one of the timer's
receptacles and the power cord from the bottom right receptacles into the timer's
other receptacle.
Page 14
724-746-5500 | blackbox.com
NBC20S-R2