Black Box NBC26S-R2 Manual page 12

Chapter 4: Configuration and Setup
Figure 4-8. Insert the plug end of the wire through the loop.
Step 5. Wrap the remaining length of power cord around the power brick (see Figure
4-11, page 13.
Step 6. Wrap the plug wire around the brick. Leave at least 7" of extra cable if the
divider will be inserted into the bottom shelf, or at least 21" of extra cable if the
divider will be inserted into the top shelf.
Figure 4-10. Wrap the remaining electrical cable around the power brick.
Leave 7" of extra cable if the divider will be inserted into the bottom shelf, or
at least 21" of extra cable if the divider will be inserted into the top shelf.
Page 12
Figure 4-9. Pull the cable taught to secure the loop.
724-746-5500 | blackbox.com
Keep the loop
on top
Lower shelf: 7"
Upper shelf: 21"
NBC20S-R2