Table of Contents
Advertisement
These operations are accessible by remote control.
Some may also be accessible by the main unit's control
panel.
Setup Wizard
This section will guide you through the unit's Setup Wizard
which includes selecting a language for your On-screen menu
and auto scan, which automatically scans and memorizes
viewable channels.
Before you begin:
Make sure the unit is connected to an antenna or cable.
1
After making all the necessary connections, follow either
instruction below.
In case of 1st time setup of new TV, press B Setup Wizard
●
menu appears automatically after the unit is turned on.
In case you would like to redo Setup Wizard, Press MENU
●
on the remote control and go to Setup submenu -> Setup
Wizard option.
2
Use H I to select Menu Language and use J K to select
English, Spanish, or French.
3
Use H I to select Go to next step and press OK.
4
Use H I to select Time Zone and use J K to select Pacific/
Alaska/Hawaii/Atlantic/Eastern/Central/Mountain.
5
Use H I to select Daylight Saving Time and use J K to
select On/Off.
6
Use H I to select Time Format and use J K to select 24-
hour/12-hour.
7
Use H I to select Go to next step and press OK.
8
Use H I to select Antenna/Cable and use J K to select
Antenna/Cable.
When Antenna is selected, the TV detects antenna
–
signals. It searches for DTV and analog TV channels
available in your area.
When Cable is selected, the TV detects signals supplied
–
by cable. It searches for DTV, analog TV, and cable
channels available in your area.
9
Use H I to select Go to next step and press OK.
Auto Tuning will begin.
●
Auto Tuning
Total Found
Analog
Digital
RF CH
Please press MENU key to exit
Back to Contents
4
1
3
63
After the Setup Wizard is completed...
If you want to scan the channels automatically again.
●
Start Scan L p. 23
You can add the desired cable and analog channels not
●
memorized by auto scan.
Favorite L p. 24
If you want to change to another language.
●
Menu Language L p. 28
15
.
English
Advertisement
Table of Contents
