Kernau KBW 361 D Instruction Booklet page 30

Table of Contents

Advertisement

Available languages

Available languages

5. DOWN button
Press the key once, LED Display in regular flash showing current set temperature. Continue pressing to
adjust set temperature, one press reduce 1℃. Regular flash quit after 5 seconds detecting no press and new
set temperature save. LED display return to show actual temperature inside.
6. FAHRENHEIT/CELSIUS TEMPERATIRE DISPLAYING BUTTON
Switch temperature display between Fahrenheit and Celsius by pressing the key for 3 seconds
7. CHILD LOCK button
I.
Lock: Press both keys at the same time for 3 seconds to lock.
II.
Unlock: Press both keys at the same time for 3 seconds to unlock.
ATTENTION
1. The ex-factory temperature of this product is 12℃, and the corresponding temperature range needs
to be set according to the actual wine.
2. For both upper and lower zone, the cooling temperature could be set from 5-22℃. And temperature
of lower zone could only be set equal to or higher than that of upper zone.
3. Alarm sound: when the system malfunction occur and alarm sound, press any key on the control
panel to cancel the alarm sound.
4. Error code:
- When the temperature sensor of upper zone failure occur, error code displays: E1 for open circuit;
E2 for short circuit.
- When the temperature sensor of Lower zone failure occur, error code displays: E5 for open
circuit; E6 for short circuit.
- When the defrost sensor failure occur, error code displays: E3 for open circuit; E4 for short
circuit.
WINE STORAGE
• The appliance is equipped with sufficient independent shelf to allow your collection of wine get
mature quietly and peacefully.
• Three been wooden shelves loading capacity: 36 bottles. (standard Bordeaux with 750ml )
• Loading capacity will vary in terms of different way of bottle arrangement or different bottle sizes.
• Each shelf is designed to put on 1 or 2 layers of wine bottles. More than 2 layers of bottle
arrangement on one shelf are not recommended.
• Each shelf could pull out partly to store wine bottles easily.
• Open the door straight enough before pulling out shelves.
• The shelf should be avoided in front of the fan as much as possible to avoid blocking the air inlet
and affecting the cooling efficiency.
• If the wine cooler would have no load for a long time, it is recommended to power it off, clean it
carefully,and open the door for ventilation.
EN
29

Advertisement

Table of Contents
loading

Table of Contents