Kernau KBW 361 D Instruction Booklet page 26

COMPARTMENTS AND ACCESSORIES
Housing
Shelf
Cover board
Control
Panel
Note: Shelves, door frame, handle and other accessories could be different according to different models
and configuration. All photos in this manual are for reference. The appliance you buy might not be
exactly the same as shown here. Please refer to the actual product.
HANDLE INSTALLATION
The handle is delivered in a separated package with
screws together inside the carton
To install handle to the door frame of the appliance:
① Reveal two small holes on the door frame from inner side
by pulling out a bit the door seal.
② Aim the handle to the holes and insert the screws from
inside.
③ Screw them up with screw-driver.
④ Put back door seal to cover the screws.
PART 3. PRODUCT DESCRIPTION
EN 25
Upper hinge
Door seal
Handle
Door
Lower hinge