Kernau KBW 361 D Instruction Booklet page 28

• Turn the door ④ 180 degrees, and insert the right
lower hinge ⑤, screw tight M5 * 16 screws ②.
(Pic.. 6)
• Door reversing is finished.
BRACKET INSTALLATION
The appliance is equipped with a pair of brackets at the top ② and at the bottom.
This pair of brackets might not be needed and can be removed as per your actual installation situation
when you build the appliance into your cabinet.
If the opening size of your cabinet is bigger than the appliance, you could fix 4 screws (①,ST4.0*13)
(packed separately in a plastic bag) into the inner wood plate of closet.
In this way, the appliance will be built-in and fixed tight with your cabinet.
Note: Seller is not responsible for any damages to the door or other parts during operation if the end-user
does not follow this instruction to fix the appliance with cabinet when needed.
Pic. 6
EN 27