Kernau KBW 361 D Instruction Booklet page 29

START OPERATION
1. Cleaning the compartment
Before power on, clean inside of the appliance and check the drainage pipe in good connection.
（For details, please refer to the "Maintenance and cleaning")
2. Put the appliance still
Before power on, level the appliance on the firm & dry floor for at least 30 minutes.
3. Power on
The appliance will start operation and it will cool down inside after 1 hour, otherwise you should
check the power connection.
CONTROL PANEL
1
7
All buttons are deactivated in lock mode. Please unlock first.
1. ON/OFF button
I. Keep pressing the key 3 seconds, power down, goes to stand-by mode.
II. Keep pressing the key again 3 seconds to return back to normal working.
2. LIGHT button
Press the key, turn on or turn off the LED lights inside. In stand-by mode, the key is invalid
3. ZONE SWITCH button
Press the key to switch between upper zone and lower zone for choosing which zone to set temperature.
Press the key once, the LED display in chosen zone flash regularly. Press up and down key to set
temperature. Press the key again; switch the zone to set temperature.
4. UP button
Press the key once, LED Display in regular flash showing current set temperature. Continue pressing to
adjust set temperature, one press increase 1℃. Regular flash quit after 5 seconds detecting no press and new
set temperature save. LED display return to show actual temperature inside.
PART 4. USAGE
3
2 4 5
EN 28
6