Table of Contents
Advertisement
if you open the oven door 15 minutes after the end
■
of operation.
When you start the oven using the controls on the
appliance itself, remote start is automatically activated.
You can now make changes or start a new programme
from your mobile device.
Activating remote start
Press the menu button.
1.
Touch "Remote start".
2.
C
appears in the display.
Basic setting
WiFi
Network
Connect to app
Remote control
Appliance information
l
Remote diagnostics
If a fault occurs, the after-sales service can use remote
diagnostics to access your appliance.
Contact the after-sales service, making sure that your
appliance is connected to the Home Connect server
and checking that the remote diagnostics service is
available in your country.
Note:
For more information and to check whether the
remote diagnostics service is available in your country,
please visit the Help & Support area of the Home
Connect website for your country: www.home-
connect.com
About data protection
When your appliance is connected for the first time to a
WLAN network, which is connected to the Internet, your
appliance transmits the following categories of data to
the Home Connect server (initial registration):
Unique appliance identification (consisting of
■
appliance codes as well as the MAC address of the
installed WiFi communication module).
Security certificate of the WiFi communication
■
module (to ensure a secure IT connection).
The current software and hardware version of your
■
domestic appliance.
Status of any previous resetting to factory settings.
■
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Note:
Ensure that the Home Connect functions can be
used only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.
Possible settings
Switching on/off
Connecting to the network/
disconnecting from the net-
work
on/off
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
Note:
You will find the Home Connect settings in your
appliance's basic settings. Which settings the display
shows will depend on whether Home Connect has been
set up and whether the appliance is connected to your
home network.
Explanation
You can switch the wireless module on and off. If WiFi is activated, you can use the Home
Connect function. The appliance requires max. 2 W in networked standby.
Switch the network connection on or off as required (e.g. for holiday).
The network information will be retained after the appliance is switched off. After switch-
ing on the appliance, wait for a few seconds while it reconnects to the network.
Start the connection process between the app and the appliance.
Use the Home Connect app to access the appliance's functions. When it is deactivated,
only the operating statuses are displayed in the app.
The display shows the network and appliance information.
Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the
appliance which features Home Connect is in
accordance with the basic requirements and the other
relevant provisions of the directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.siemens-home.bsh-group.com on the
product page of your appliance with the additional
documents.
2.4 GHz band: max. 100 mW
5 GHz band: max. 100 mW
BE
ES
y
HU
SK
5 GHz Wi-Fi: for indoor use only
Home Connect
BG
CZ
DK
DE
FR
HR
IT
CY
MT
NL
AT
PL
FI
SE
UK
NO
en
EE
IE
EL
LV
LT
LU
PT
RO
SI
CH
TR
21
Advertisement
Table of Contents
