Prior To Using The Machine; Preparing The Machine For Use; The Importance Of Water Decalcification; Filling With Salt - Whirlpool DW61SL Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Prior to using the machine for the first time
Check whether the electricity and supply water specifications match the values indicated by the
installation instructions for the machine.
Remove all packaging materials inside the machine.
Set the water softener.
Add 2 kg salt into the salt compartment and fill with water up to a level at which it will almost
overflow.
Fill the rinse aid compartment.

PREPARING THE MACHINE FOR USE

The importance of water decalcification

For a good washing function, the dishwasher needs soft, i.e. less calcareous water. Otherwise, white
lime residues will remain on the dishes and the interior equipment. This will negatively affect your
machine's washing, drying and shining performance. When water flows through the softener system,
the ions forming the hardness are removed from the water and the water reaches the softness
required to obtain the best washing result. Depending on the level of hardness of the inflowing water,
these ions that harden the water accumulate rapidly inside the softener system. Therefore, the
softener system has to be refreshed so that it operates with the same performance also during the
next wash. For this purpose, dishwasher salt is used.

Filling with salt

Use softener salt specifically produced for use in dishwashers. To put softener salt, first remove
This way, overflowing salt gets immediately cleaned up through the wash operation. If you are not
going to wash any dishes immediately after putting salt, then run a short washing program with an
empty machine in order to avoid any damage ( to prevent corrosion ) to your machine due to the salt
overflow while filling in the salt container.
the lower basket and then open
the salt compartment cap by
turning it counter
clockwise.1 2
first fill the compartment with 2kg
salt and
water3
at overflowing
level If available,using the
provided will make filling easier.;
refit the cap and close it. After
every 20th-30th wash, add salt
into your machine until it fills up
(approx. 1.5 kg)
Fill the salt compartment with
water at first use only.
We recommend that you use
small-grained or powder softener
salt.
Do not put table salt into your
machine. Otherwise, the function
of the softener compartment may
decrease over time.
start your dishwasher, the salt compartment gets filled with water.
Therefore, put the softener salt prior to starting your machine.
11
At
funnel4
When you
SALT

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Dw61wh

Table of Contents