Technical Specifications; Conformity With The Standards And Test Data; Safety Information And Recommendations; Recycling - Whirlpool DW61SL Instruction Manual

Technical specifications

Capacity ..........................................
Height ................................. .........
Height (without worktop) ....................
Width ................................... .......
Depth .................................. ........
Net Weight ......................................
Electricity input ..................................
Total Power .......................... .........
Heating Power ...............................
Pump Power .................................
Drain Pump Power ............................
Water supply pressure............... .........
Current .........................................
Producer company has its right to amend design and technical specifications reserved.
•
The machine's service life is 10 years (the duration required to keep spare parts for the machine
•
to fulfil its usage functions).
Conformity with the standards and Test data / EC Declaration of Conformity
All stages related to the machine are executed in accordance with the safety rules provided in all
relevant directives of the European Community.
2004/108/EC, 2006/95/EC, IEC 436/DIN 44990, EN 50242

SAFETY INFORMATION AND RECOMMENDATIONS

Recycling

Certain components and the packaging of your machine have been produced from recyclable
•
materials.
Plastic parts are marked with international abbreviations:
•
(>PE< , >PS< , >POM<, >PP<, ....)
Cardboard parts have been produced from recycled paper and they should be disposed of into
•
waste paper collection containers for recycling.
Such materials are not suitable for being disposed of into garbage bins. They should be delivered
•
to recycling centres instead.
Contact relevant centres in order to obtain information on methods and points of disposal.
•

Safety Information

When you take delivery of your machine
Check for any damage to your machine or to its packaging. Never start a machine damaged in
•
any way, make sure to contact an authorised service.
Unwrap the packaging materials as indicated and dispose of them in accordance with the rules.
•
The points to pay attention during machine installation
Choose a suitable, safe and level place to install your machine.
•
Carry out the installation and connection of your machine by following the instructions.
•
This machine should be installed and repaired by an authorised service only.
•
Only original spare parts should be used with the machine.
•
Before installing, be sure that the machine is unplugged.
•
12 place settings
845 mm
815 mm
596 mm
598 mm
46 kg
220-240 V, 50 Hz
2200 W
2000 W
100 W
30 W
0.03 MPa (0,3 bar) - 1 MPa (10 bar)
10 A
5