Table of Contents
Advertisement
4. Software Reference
ASUS Digital VCR
NOTES
1. The following can only be used as a general reference and may not be an
exact reflection of the software version you are using. The contents are sub-
ject to change at any time without notice.
2. ASUS Digital VCR can only be used with the TVR model (models with a
Video Decoder) and monitors or monitor drivers that are designed for I2C
bus control.
3. ASUS Digital VCR currently only supports Windows 9x/ME.
ASUS Digital VCR can be used to:
1. View images using your monitor as screen from traditional consumer devices,
such as videocassette players, camcorders, digital cameras, and laser disc players
through the onboard RCA or SVHS VIDEO-IN connectors.
2. Capture live motion video up to 30 frames/second (minimum system require-
ment: Pentium II/266). For TimeShifting™ recording at MPEG-II format
(704x480, 30 frames/second), minimum system requirement is Pentium III/600
(recommended: Pentium III/700 or higher).
NOTE: You should already have installed DirectX 7 or later to use ASUS Digital
VCR (see 3. Software Setup | Install DirectX)
Running ASUS Digital VCR
To run the utility, click Start and point to Programs and then ASUS Digital VCR
and then click ASUS Digital VCR.
You may also run ASUS Digital VCR by clicking or right-clicking the ASUS Con-
trol Panel icon (see 4. Software Reference | ASUS Control Panel) on the taskbar's
status area to display the ASUS Control Panel, pointing to ASUS Digital VCR, and
then clicking it.
Uninstalling ASUS Digital VCR
To uninstall the software, click Start and point to Programs and then ASUS Digital
VCR and then click Uninstall. You may also uninstall the software using the Add/
Remove Programs Properties dialog box at the Windows Setup tab. See Win-
dows online help for more information on removing a Windows component.
ASUS V7100 Series User's Manual
85
Advertisement
Table of Contents
