Starting The Computer By Password; Power-Up Modes; Panel Power Off/On - Toshiba Satellite Pro T130-EZ1301 User Manual

T110/T130

Starting the computer by password

To start up the computer with the user password, follow these steps:
1. Turn on the power as described in Chapter 3,
following message appears:
At this point, the hotkeys FN + F1 to F9 do not work. They will function after
you enter the password.
2. Enter the password.
3. Press ENTER.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.

Power-up modes

The computer has the following power-up modes:
Boot Mode: Computer shuts down without saving data. Always save
your work before you turn the computer off in boot mode.
Hibernation Mode: Data in memory is saved to the hard disk.
Sleep Mode: Data is maintained in the computer's main memory.
Refer also to the sections
in Chapter 3,
Hot keys
You can use hot keys FN + F3 to enter Sleep Mode and FN + F4 to enter
Hibernation Mode. Refer to Chapter 5,

Panel power off/on

You can set up your computer so that power turns off automatically when
you close the display panel. When you open the panel, power turns on in
Sleep Mode or Hibernation Mode but not in Boot Mode.
If the panel power off function is enabled and you shut down Windows
do not close the display until the shut down function is completed.
6-12
Enter Password [ ]
Turning on the power
Getting Started.
Getting Started. The
and Turning off the power
The Keyboard for details.
® ,
User's Manual