5. Slide your fingernail or a thin object under the cover and lift it off.
1. Memory Module Cover
6. Lift one side of the insulator sheet and fit the module's connectors into
the computer's connectors at about a 30 degree angle. Press the
module carefully to ensure a firm connection.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
Slot A is reserved for main memory. Use slot B for expanded memory.
If only one card is used, make sure it is installed in slot A.
7. Push the module down so it lies flat. Latches on either side will click into
place to secure the module.
User's Manual
Removing the memory module cover
2
1. Slot A
2. Slot B
Installing the memory module
T110/T130
1
1
8-7