Maintenance - EGO LM2100SP-FC Operator's Manual

MULCHING TIPS
WARNING:
stones, sticks, wire and other debris that might be thrown by the rotating blade.
◾
Release the switch to turn off the mower blade rotation when crossing any graveled
areas; stones can be thrown by a rotating blade.
◾
Set the mower to the highest cutting height when mowing on uneven ground or in
tall growth.
◾
For effective mulching, do not cut wet grass; it tends to stick to the underside of
the deck, preventing the proper mulching of grass clippings. The best time to mow
grass is in the late afternoon, when the grass is dry and the newly cut area will not
be exposed to direct sunlight.
◾
For the best mulching performance, set the cutting height to remove approximately
one third of the grass blade length, ideally no more than 1 1/2" at one time. If the
grass is overgrown, it may be necessary to increase the cut height to make it easier
to mow and to prevent overloading the motor. Slow your cutting pace in tall or thick
grass conditions. For mulching extremely thick or tall grass, it is advisable to first
cut at a high cut-height setting, and then re-cut to the final cut height. Otherwise,
make narrower cuts and mow slowly. ALWAYS MAKE SURE THAT THE BLADE IS
SHARP.

MAINTENANCE

WARNING:
from the mower before cleaning or performing any maintenance.
WARNING:
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
34
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC
Inspect the area where the mower is to be used and remove all
To avoid serious personal injury, always remove the battery pack
When servicing, use only identical replacement parts. Use of any