Advertisement
User instructions
1.2
Washing programs
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The softener container contains regenerating salt.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
OPTION SELECTION
Options are selected by pressing the relative button by the symbol of the
option required; the light comes on to confirm that the option has been
activated.
•
It is not possible to select any options when the soak
program is being used.
•
All options except "Flexi Tabs" are disabled at the end of the
wash cycle. To disable the "Flexi Tabs" option, press the
relative button (the light goes out).
•
All options, including "Flexi Tabs" are disabled when a
program is CANCELLED after it has begun.
ADDITIONAL OPTIONS
Some models feature additional options, activated by pressing two
buttons simultaneously. In this case, two lines in the control panel
graphics link the symbol of the additional option to the two buttons to be
pressed simultaneously to enable it. (e.g. "Flexi Tabs" in this
illustration)
QUICK TIME OPTION
Select this option together with any washing program (except the soak
program) to SHORTEN the cycle. To activate this option, press button
(light comes on) after selecting the program required.
The option is automatically deactivated at the end of the program.
11
Advertisement
