Chapter 1. Getting started This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: •...
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Please see the illustration below for an example of camera swivel range. Chapter 1.
Camera Swivel Press this button to pop up the camera module, start to adjust the swivel range. Please see the illustration below for an example of camera swivel ran Pivot Tilt Chapter 1.
Swivel Open and close the camera cover.. Press this key, turn on/off the light of camera. Chapter 1.
Please see the illustration below for working examples with multi-mode camera. Gesture Video conferencing Scanning Task light Desktop video Camera function description: ® a: Camera type: Intel RealSense Camera SR300(3D Camera) b: Highest resolution of different mode: Format Resolution Ratio Nominal frame per second Depth(Z),Depth 640*480...
Monitor controls Your monitor has controls on the side which are used to adjust the display. For information on how to use these controls, please see "Adjusting your monitor image"on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position).
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information located on page iii before carrying out this procedure. Power off your computer and all attached devices, and unplug the computer power cord. Connect the cables according to below icon indication.
For the computer with Mini DisplayPort. Mini DP For the computer with USB 3.0 port. Micro USB Chapter 1.
For notebook computer with USB Type-C. Type-C For USB Type-C Flash Driver. USB C Connect the headset. Chapter 1.
Insert the DC output connector from the external power supply into the power connector of the monitor and connect the power cord into the external power adapter. Plug the power cord from the monitor external power supply and the power cord from the system into grounded electrical outlets.
11. For the monitor with charging stand (Optional). AirFuel™ AirFuel™ Note: The mobile phone must be certified or attaches to an certified charging receiver (dongle or sleeve). 12. Your monitor has been embedded a pair of speaks with 3W, and it can support DP/TYPE- C audio output.
Thank you for purchasing this Lenovo™ product. Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing product and services that are important to you, as well as in developing better ways to communicate with you.
For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/. Arranging your work area Use a work surface of appropriate height and available working area to allow you to work in comfort.
Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system;...
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description...
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. To use the controls: Press to open the main OSD menu. to move among the icons. Select an icon and press to access that function.
Table 2-2. OSD functions OSD Icon on Main Controls and Menu Submenu Description Adjustments Contrast Adjusts difference between All input ports light and dark areas Brightness Adjusts overall screen Brightness/ brightness Contrast/ Enable dynamic contrast /DCR ratio. Color Adjusts intensity of red, green, and blue.
Table 2-2. OSD functions OSD Icon on Main Controls and Menu Submenu Description Adjustments Scaling • Selects type of scaled All input ports image. • Original AR:Same Image Properties Aspect Ratio with input signal. • Full Screen: Expand image to full screen.. Over Drive •...
Table 2-2. OSD functions OSD Icon on Main Controls and Menu Submenu Description Adjustments Accessibility Changes button repeat rate All input ports and menu time-out settings. Options Button repeat rate • • Default • Slow Menu time out: Set the duration of time that the OSD will remain active when no operation is performed.
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment.
Maximum height 296.46mm (11.7inch) Maximum width 527.04mm (20.7 inch) Pixel pitch 0.2745mm (0.011 inch) AC/DC adapter Model ADP-90XD B Trademark Lenovo Rating Input: 100-240V~, 50-60Hz, 1.5A Output: 20V , 4.5A Power consumption Normal operation <90W Note: Power consumption Standby/Suspend <0.5W figures are for the monitor <0.5W...
Table 3-1. Monitor specifications for type-model 60E4-ECR1-WW Video input (USB TYPE-C) Interface USB TYPE-C Input signal TYPE-C Horizontal 1920 pixels (max) addressability Vertical addressability 1080 lines (max) Clock frequency 170 MHz Communications VESA DDC Supported Display Modes Horizontal frequency 30 kHz - 83kHz Vertical frequency 50Hz - 75Hz Native Resolution...
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem...
Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The power The video signal cable Be sure the video cable is "Connecting and indicator is is loose or connected with the turning on your amber, but there disconnected from the system properly.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Scratches or punctures on monitor screens. Service parts Table 3-3. The following parts are for use by Lenovo service, or Lenovo authorized dealers, to support the customer warranty. Parts are for service use only. The table below shows information for model 60E4-ECR1-WW.
Product replacement assistance or exchange of defective components also is available during the warranty period. In addition, if your option is installed in a Lenovo computer, you might be entitled to service at your location. A Lenovo technical support representative can help you determine the best alternative.
(Arabic,English) El Salvador 800-6264 (Spanish) Estonia 372-66-0-800 (Estonian, Russian, English) Finland Warranty service and support: +358-800-1-4260 (Finnish) France Warranty service and support: 0810-631-213 (hardware) (French) Germany Warranty service and support: 0800-500-4618 (toll-free) (German) Greece Lenovo Business Partner (Greek) Appendix A.
(Spanish) Honduras Dial 800-0123 (Spanish) Hungary +36-13-825-716 (English, Hungarian) India Primary: 1800-419-4666 (Tata) Secondary: 1800-3000-8465 (Reliance) Email: firstname.lastname@example.org (English and Hindi) Indonesia 1-803-442-425 62 213-002-1090 (Standard Charges Apply) (English, Bahasa Indonesia) Ireland Warranty service and support: 01-881-1444 (English) Israel Givat Shmuel Service Center: +972-3-531-3900...
Country or Region Telephone Number Panama Lenovo Customer Support Center: 001-866-434 (toll-free) (Spanish) Peru 0-800-50-866 OPCION 2 (Spanish) Philippines 1-800-8908-6454 (GLOBE subscribers) 1-800-1441-0719 (PLDT subscribers) (Tagalog, English) Poland Laptops and tablets branded with logo Think: 48-22-273-9777 ThinkStation and ThinkServer: 48-22-878-6999...
Country or Region Telephone Number Vietnam 120-11072 (Toll Free) 84-8-4458-1042 (Standard Charges Apply) (Vietnamese, English) Appendix A.
Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.