Grundig MUSIC6500B User Manual page 38

MAIN OPERATION ____________________________
searches the FM waveband and store
the first 30 radio stations as presets 1
to 30 (if available).
2. After the scanning process
completed, the device set the first
received station for listen.
Note:
You can select whether the device will
•
scan radio stations with Strong Station
Only or All Stations from the menu of FM
mode.
To do this;
1. Long press the »
the menu.
Display: <Scan setting>
•
2. Choose the option <Scan setting> by
short press the » « to confirm.
Display: <Strong stations only> or <All
•
stations>.
3. Select the desired option (e.g. Strong
stations only) by short press the
» « or » « button, short press the
» « button to confirm.
4. Long press »
menu.
5. Now, long press the » « button to
start the Auto Tuning System (AMS)
again for scan the FM waveband and
store the first 30 radio stations with
a strong signal as presets 1 to 30 (if
available).
« button to open
« button to close the
6. Long press the » « or » « button to
search the available previous/next
radio stations.
The automatic station search starts, and
•
stops at the next station with a strong
signal.
7. Press briefly the » « or » « button
until you have found the frequency
you want.
The frequency changes in steps of
•
0.05MHz.
Tuning and storing DAB and FM radio
stations – after a removal
After the automatic station search, all
radio stations will be stored in the program
list. That is reasonable, if you will use the
device in another place or search new
DAB radio stations.
1. Short press the » « to power on the
device in standby mode.
2. Short press the »M« button to select
the DAB/FM mode.
3. In DAB/FM mode, long press the »
« button to start the Auto Tuning
System directly.
The automatic station scan starts to
•
search and store the radio stations.
4. After the scanning process
completed, the device set the first
received station of DAB/FM for listen
or
or
ENGLISH 37