Do you have a question about the Music 61 and is the answer not in the manual?
Questions and answers
Иванов
March 21, 2025
Как се настройва алармата?
1 comments:
Mr. Anderson
March 21, 2025
To set the alarm on the Grundig Music 61:
1. Move the selector »e §« to position »§«. 2. Press »TUNING –« to adjust the hour step by step. 3. Press »TUNING +« to adjust the minutes step by step. 4. Press »MODE« to confirm the alarm time. 5. The display will show the set alarm time, then switch back to the current time. 6. To check the alarm time, briefly press »MODE«. 7. To activate or deactivate the alarm standby mode, press »ALARM« until »e« or »§« appears or disappears from the display.
Page 3
________________________________________________________________________________ ENGLISH SAFETY AND INFORMATION OVERVIEW POWER SUPPLY SETTINGS RADIO MODE ALARM MODE 3...
Page 4
SAFETYANDINFORMATION ______________________________ Technicaldata This device is designed for the playback of audio signals. This device is noise-suppressed Any other use is expressly prohibited. according to the applicable EU Make sure the device is protected from drip- directives. ping or splashing water. This product fulfils the European directives Do not place any vessels such as vases on the 2004/108/EC, 2006/95/EC, 2009/125/EC...
Page 5
OVERVIEW ____________________________________________________________ See the figure on page 3. MODE Activates the clock and alarm time setting; ON/OFF Switches the device on and off; display during radio mode switches off the alarm signal RDS information (station name, (signal tone or radio station) programme type, radio text), when the alarm function is acti- frequency, time and alarm time.
Page 6
POWERSUPPLY _ ___________________________________________________ Mainsoperation Notes: Do not expose the batteries to extreme heat, Note: caused for example by direct sunlight, heat- Check that the mains voltage on the type ers or fire. plate (on the bottom of the device) corre- Remove the batteries when they are flat or sponds to your local mains supply.
Page 7
SETTINGS _ ______________________________________________________________ Settingandstoringradiosta- Settingthetime tions... Note: When you select »CT ON« in the following ...withtheautomaticstationsearch setting, the time is updated automatically if When the device is first connected to the mains or the RDS program also supports this function. the batteries are first inserted, the device begins With the device switched off, keep pressing an automatic FM station search and stores the...
Page 8
RADIOMODE _______________________________________________________ Switchingonandoff RDSstationservice Press »ON/OFF« to switch on the device. RDS (Radio Data System) is an information sys- – The most recently selected station is activated tem which is transmitted additionally by most (Last Station Memory). FM stations. If the device is currently receiving an RDS station, it displays the station name, e.g.
Page 9
ALARMMODE ______________________________________________________ Settingthealarmtime Brieflydisplayingthealarmtime With the device switched off, briefly press With the device switched off, press »MODE« »MODE«. briefly. – The display changes from the clock to the set – Display: the last alarm time set and »AL«. alarm time, Pres and hold down »MODE«.
Page 10
ALARMMODE ______________________________________________________ Sleeptimermode The device possesses a sleep timer, which switch- es it off in radio mode at a preset time. It is pos- sible to set nine switch-off times between 90 and 10 minutes. Switchingonthesleeptimer Press »SLEEP« to switch on the device. ≤...
Need help?
Do you have a question about the Music 61 and is the answer not in the manual?
Questions and answers
Как се настройва алармата?
To set the alarm on the Grundig Music 61:
1. Move the selector »e §« to position »§«.
2. Press »TUNING –« to adjust the hour step by step.
3. Press »TUNING +« to adjust the minutes step by step.
4. Press »MODE« to confirm the alarm time.
5. The display will show the set alarm time, then switch back to the current time.
6. To check the alarm time, briefly press »MODE«.
7. To activate or deactivate the alarm standby mode, press »ALARM« until »e« or »§« appears or disappears from the display.
This answer is automatically generated