Table of Contents
Advertisement
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Always be careful when you move the appliance because it
is heavy. Always wear safety gloves.
• Make sure the air can circulate around the appliance.
• Wait at least 4 hours before connecting the appliance to the
power supply. This is to allow the oil to flow back in the
compressor.
• Do not install the appliance close to radiators or cookers,
oven or hobs.
• Do not install the appliance where there is direct sunlight.
• Do not install this appliance in areas that are too humid or
too colds, such as the construction appendices, garages or
wine cellars.
• When you move the appliance, lift it by the front edge to
avoid scratching the floor.
WARNING!
When positioning the appliance, ensure the supply cord is
not trapped or damaged.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
7
Advertisement
Table of Contents
