3Com AirConnect 3CRWE777A User Manual page 24

20 C 4: C
HAPTER
The user-configurable parameters are:
Mode - Set the station operation mode to AdHoc for
I
network configurations that do not have any access
points, or to Infrastructure for configurations with
access points ("Ad hoc" is the default setting).
SSID - Input an SSID number if the roaming feature is
I
enabled ("101" is the default setting).
Tx Rate - Indicates the communication rates. Select
I
appropriate transmission speed to match your wireless
LAN settings ("Fully Automatic" is the default setting).
WEP - For more secure data transmission, select
I
"Enabled" to use WEP security. The advanced Wired
Equivalent Privacy (WEP) is implemented in this card to
prevent unauthorized access. However, for normal use
it is recommended to retain the factory-set "Disabled"
WEP. ("Disabled" is the default setting).
Channel - If you are setting up an Ad hoc wireless LAN,
I
set the channel number to the same radio channel as
that used by the other wireless clients in your group.
However, if you are connecting to a network via an
access point, then use the same channel as that used by
the access point (access point default: 3).
D
ONFIGURATION AND
U
IAGNOSTIC TILITY