Table of Contents
Advertisement
--------
Indicator/
Description
symbol
Programme status:
Drying
Ù
Dryness level: Iron Dry
S
Dryness level: Cupboard Dry
»
Dryness level: Cupboard Dry
Ò
Plus
Anti-Crease
Ý
- ˜ -
Pause
Program end
"Ÿš
‹ ‹ : ‹ ‹
Programme duration
e.g. f
Programme delay
02:45
Empty the condensation
ð
container ~ Page 31
Fluff filter
ñ
Automatic heat exchanger
Û
rinse
Rinsing progress indicator
ø
Basic appliance care pro-
''§"
gramme
Appliance settings
à
Information
Continuously lit: Status indicator
Expected programme duration in hours and minutes.
Appears when altering and activating the "Ready in" time
Empty the condensation container and then reinsert
■
it.~ Page 31
Then press I (Start/Pause).
Clean the filter in the condensation container.
■
If the optional drain hose* is installed, make sure that
■
the drain hose:
– Is correctly connected. ~ Page 38
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
Run the intensive appliance care programme.
■
Check that no debris has found its way into the base
■
unit. Open the maintenance flap and remove any debris.
Remove the fluff ~ Page 32
The heat exchanger is cleaned automatically. Do not pull out
the condensation container or cancel the programme while
this is displayed.
Not a fault. After a certain period, the appliance will automat-
ically recommend that you run the basic appliance care pro-
gramme. Run the basic appliance care programme.
~ Page 48
Alter the appliance settings ~ Page 34
Display
en
21
Advertisement
Table of Contents
