Table of Contents
Advertisement
Changing the programme or
adding more laundry
You can remove or add laundry and
change or adjust the programme at any
time during drying.
Open the door or press
1.
Başlat/Beklet (Start/Pause) Ü to
pause the programme.
Add or remove laundry.
2.
If required, select a different
3.
programme or a different
programme setting.
~ "Overview of programmes"
on page 20
~ "Programme settings"
on page 22
Close the door.
4.
Press Başlat/Beklet
5.
(Start/Pause) Ü.
The programme duration is
Note:
updated on the display, depending on
the load and on the residual moisture in
the laundry. The values displayed may
change when the programme or load is
changed.
Cancelling the programme
The programme can be cancelled at
any time by opening the door or
pressing Başlat/Beklet
(Start/Pause) Ü.
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the programme, remove all
items of laundry from the dryer and
spread them out to allow the heat to
dissipate.
Programme end
- ‹ - will appear on the display.
Operating the appliance
Removing laundry and
switching off the appliance
Remove the laundry.
1.
Press # to switch off the appliance.
2.
Emptying the condensation
container
By default, the condensation from the
appliance runs into the condensation
container.
Alternatively, you have the option of
discharging the condensation water
supplied depending on the model. If you
choose to discharge the condensation
water into the waste-water system, you
will not need to empty the condensation
container during the drying programme
or after each time you use the dryer.
*
into the waste-water system via a
drain hose
en
*
27
Advertisement
Table of Contents
