Running The Basic Appliance Care Programme - Siemens WT7U480ES Installation And Operating Instructions Manual

Table of Contents

Advertisement

Appliance care
en
Push the filter in until you feel it lock
4.
into place.
Caution!
If the filter is not inserted, fluff can
find its way inside the appliance
and damage it.
Only operate the appliance with the
filter inserted.
The condensation container is now
ready for the appliance care
programme.
If you are draining the
Note:
condensation water from the appliance
using the drain hose, reverse these
steps after running the basic or
intensive appliance care programme.
48
Running the basic appliance
care programme
To ensure that you achieve optimal
drying results again and again, you can
run the basic appliance care
programme.
After a certain period, your
Note:
appliance will automatically recommend
that you run the basic appliance care
programme. ''§" will then appear on
the display for 5 seconds before the
programme starts, and again once the
programme ends. This message will
appear repeatedly until you have run the
basic appliance care programme
through to the end.
Run the appliance care programme as
follows:
Prepare the appliance for appliance
1.
care. ~ Page 46
Set the programme to position 1.
2.
Press and hold S (Iron Dry). At the
3.
same time:
Set the programme to position 4.
4.
'˜‚ and the programme duration will
now alternate on the display.

Advertisement

Table of Contents
loading

Table of Contents