Removing the Stand
― Before removing the stand from the product, place the product on a flat and stable surface with the screen
facing down.
1
Place the machine on a clean and flat surface
as shown in the figure. Push the button up and
hold.
3
Follow the arrow to separate the stand from
the display.
2
Lift the locking part of the bracket upward
in the direction of the arrow to separate the
bracket body.
4
Unscrew the screws and separate the stand
rod from the bracket as indicated by the
arrow.
Precautions for moving the product
•
Hold the lower corners or edges of the
product when moving it.
•
Do not hold the product upside down only
by the stand.
•
Do not directly apply pressure on the screen.
•
Do not hold the screen when moving the
product.
•
Do not press down on the product. There is
a risk of damaging the product.
9