Table of Contents
Advertisement
3
WORK
3.4
Installing the front fender
3.5
Installing the start number plate
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Activate the hand brake lever multiple times until the brake linings are in contact
with the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Pull the front brake and compress the fork powerfully a few times.
101744-11
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork stub
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
C00420-10
Finishing work
–
Install the start number plate. (
–
Position the start number plate. Mount and tighten screw
Guideline
Remaining screws, chassis
Info
Make sure that the holding lugs engage in the fender.
–
Position the brake line and clamp. Mount and tighten screw
C00418-10
.
2
.
3
p. 7)
M24x1.5
45 Nm
(33.2 lbf ft)
p. 6)
M8
15 Nm
(11.1 lbf ft)
and
.
1
2
M6
10 Nm (7.4 lbf ft)
.
1
M6
10 Nm (7.4 lbf ft)
.
2
7
Advertisement
Table of Contents
