Set Up The 3G/Lte Interface On The Zywall/Usg - ZyXEL Communications ZyWALL ATP Series Handbook

www.zyxel.com

Set Up the 3G/LTE Interface on the ZyWALL/USG

Connect a compatible mobile broadband USB device to use a cellular
connection.
In the ZyWALL/USG, go to CONFIGURATION > Network > Interface > Cellular, the
connected device will automatically display in the Cellular Interface Summary.
Click Activate and then the Apply button at the bottom of this page.
CONFIGURATION > Network > Interface > Cellular > Activate
The default Connectivity method is Nailed-Up. The connection should always be
up after you activate the cellular interface. You can click Edit and go to the
Connectivity section to clear the Nailed-Up check box to have the ZyWALL/USG
to establish the connection only when there is traffic.
CONFIGURATION > Network > Interface > Cellular > Connect
CONFIGURATION > Network > Interface > Cellular > Edit
634/782