Set Up The Packet Capture Feature - ZyXEL Communications ZyWALL ATP Series Handbook

ZyWALL/USG Packet Capture Feature Settings
Note: New capture files overwrite existing files of the same name. Change the File
Suffix field's setting to avoid this. This example was tested using USG110 (Firmware
Version: ZLD 4.25).

Set Up the Packet Capture Feature

8 Go to MAINTENANCE > Diagnostics > Packet Capture > Capture > Interfaces.
Select interfaces for which to capture packets and click the right arrow button to
move them to the Capture Interfaces list.
www.zyxel.com
465/782