Set Up The Wan Trunk (Zywall/Usg_Hq) - ZyXEL Communications ZyWALL ATP Series Handbook

Set up the WAN Trunk (ZyWALL/USG_HQ)

Go to CONFIGURATION > Interface > Trunk > User Configuration > Add. Select
wan1 and wan2 into the trunk Member and set wan2 Mode to be Passive.
CONFIGURATION > Interface > Trunk > User Configuration > Add
Go to CONFIGURATION > Interface > Trunk > Configuration. Select Disconnect
Connection before Falling Back. In the Default WAN Trunk, select User Configured
Trunk to be the customized WAN trunk added in the previous step
(Multi_WAN_Failover in this example).
CONFIGURATION > Interface > Trunk > User Configuration > Add
www.zyxel.com
238/782