Table of Contents
Advertisement
www.zyxel.com
Then, go to VPN > Branch Office VPN > Tunnel to add a Tunnel Route Settings. In
the Local IP section, set the Network IP to be the IP address range of the network
connected to the WatchGuard. In the Remote IP section, set the Network IP to be
the IP address range of the network connected to the ZyWALL/USG. Click OK.
VPN > Branch Office VPN > Tunnel > Address
193/782
Advertisement
Table of Contents
Related Manuals for ZyXEL Communications ZyWALL ATP Series
Related Products for ZyXEL Communications ZyWALL ATP Series
- ZyXEL Communications ZYWALL OTPV2 - SUPPORT NOTE V1
- ZyXEL Communications ZyWall ATP series
- ZyXEL Communications ZyWALL 70
- ZyXEL Communications ZyXEL ZYWALL10
- ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0
- ZyXEL Communications ZYWALL - CLI
- ZyXEL Communications ZYWALL 10W - GUIDE D'INSTALLATION
- ZyXEL Communications ZYWALL TURBO CARD