Samsung WD10T Series User Manual page 55

Table of Contents

Advertisement

Mesh filter
Clean the mesh filter of the water hose once or twice a year.
NOTE
If the mesh filter is clogged, an information code of "Check water supply" appears on the screen.
U-PJT_COMBO-MD_SimpleUX_DC68-04269L-00_EN.indd 55
1. Turn off the washing machine, and unplug the
power cord.
2. Close the water tap.
3. Loosen and disconnect the water hose from the
back of the washing machine. Cover the hose
with a cloth to prevent water from gushing out.
4. Use pliers to pull out the mesh filter from the
inlet valve.
5. Submerge the mesh filter deeply in water so that
the threaded connector is also submerged.
6. Dry the mesh filter completely in the shade.
7. Reinsert the mesh filter into the inlet valve, and
reconnect the water hose to the inlet valve.
8. Open the water tap.
English 55
2021/6/30 9:07:14

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Wd9 t seriesWd8 t seriesWd1 t seriesWd90t series

Table of Contents