Operations; Control Panel - Samsung WD10T Series User Manual

Operations

Control panel

02
01
01 Power
02 Navigation dial
03 Start/Pause
04 Display
05 OK
06 Temp.
07 Rinse
36 English
U-PJT_COMBO-MD_SimpleUX_DC68-04269L-00_EN.indd 36
04
03
05
Tap to turn the washing machine on or off.
• If you do not manipulate the control panel for 10 minutes after the
washing machine is turned on, the washing machine automatically
turns off.
• The washing machine automatically turns off when the cycle
completes.
CAUTION
Do not tap to turn the washing machine off while the wash cycle is in
progress. Tap and hold
the washing machine off.
Turn the navigation dial left or right to navigate through cycles and
functions.
When you turn the navigation dial, LCD displays your selection (such as
cycle, additional functions, and system functions).
Tap and hold to start or pause an operation.
The display shows current cycle information and estimated time
remaining, or an information message when a problem occurs.
Tap to confirm your selection of function or setting.
Tap to change the water temperature for the selected cycle.
• The indicator above the button indicates the default or selected
setting.
Tap to change the rinse count for the selected cycle.
• The indicator above the button indicates the default or selected
setting.
06 07
to pause the cycle first, and then tap
10
08 09
to turn
2021/6/30 9:07:09