Replacing Lamps; Troubleshooting - Whirlpool WT9BTABC Manual

Baffle Filter
 Baffle filters can be cleaned by hand. Soak them for about 5-10 minute in water(40-50℃) with a
neutral detergent, then use the soft cloth or soft brush to gently clean it. Please do not apply too
much force when cleaning, to avoid damage. (Baffle filter can be dried naturally under the sunlight).
 Filters should be washed separately from crockery and kitchen utensils. Do not use rinse aid.
 All cooker hood filters are made of metal products. Do not use cleaning agents that have corrosive
effects on metal products during cleaning.
Baffle filter
The bulb must be replaced by the manufacturer, its service agent or similarly qualified persons.
 Always switch off the electricity supply before carrying out any operations on the appliance. When
handling the bulb, make sure it is completely cooled down before any direct contact to hands.
 When handling bulbs hold with a cloth or gloves to ensure perspiration does not come in contact
with the globe as this can reduce the life of the bulb.
Note:
 Before changing the lights, make sure that the appliance is turned off and unplugged.
 Protect against danger when changing lights, such as wearing gloves.
Fault
Light on, but motor
does not work
Light does not work,
motor does not work
Oil leakage

Replacing Lamps

Troubleshooting

Possible Cause
Fan speed is off
Fan switch or motor failed
Mains power cable is loose or
disconnected
Excessive grease accumulated on
filters or oil cup
Leakage from the connection of
duct cover
Select a fan speed.
Contact service center.
Check and make sure power cord
is properly connected.
Clean baffle filters and oil cup.
Contact service center.
14
Solution