Advertisement
Machine Translated by Google
Adjust the sound
Preventing low sounds from being output from the speakers
Adjusting the sound
Five
Using a high-pass filter will prevent sounds with frequencies lower than the selected frequency from being output from
each speaker.
About high pass filter (HPF)
A high-pass filter is a filter that cuts the range below the
set frequency (low range) and passes the high range.
By setting the high-pass filter, you can adjust the
connection between the sound and the subwoofer. You
can adjust the front and rear speakers
separately.
About the slope
By adjusting the slope (gradient of
attenuation), you can adjust the sound
connection between the subwoofer and
the front/rear speakers. When the slope is
set to 0 dB/oct. (Pass), the audio signal
bypasses the filter circuit and the high-pass filter has no effect.
About cutoff frequency
Sounds higher than the selected frequency will be output
from each speaker.
About mute
You can mute the front/rear speakers
(filters). No sound will be output from muted
speakers.
76
volume/selector
audio
AUDIO button
Set to high pass
1
filter mode
Press the AUDIO button to select (ÿ
Adjusting the sound q page 72)
FrontHPF: When adjusting the front speakers
RearHPF: When adjusting rear speakers
When adjusting the rear speakers, display "RearHPF".
The "FrontHPF" and "RearHPF" displays will disappear in
about 1 second, and the screen will automatically switch to
the slope adjustment screen in step 2.
High pass filter (HPF)
Advertisement
