Advertisement
Machine Translated by Google
Built-in MD
Find the song or group you want to listen to
Five
You can listen to only the beginning of the song for about 10 seconds one after another. In the case of a group disc, you
can listen to only the beginnings of the songs of the group you are currently listening to one after another. You can also
listen to just the beginning of the first song of all groups one after another.
1
For group discs, select repeat
mode and select playback range.
(ÿBuilt -in MDe page 47)
ÿ When searching for the song
you want to listen to (track
scan playback), switch the playback range to
group repeat. All songs in the currently playing
group can be played for about
10 seconds at a time. ÿ When searching
for the group you want to
listen to (group scan playback) Switch the
playback range to disc repeat. You can play only
the first song of every group on the disc, approximately 10 seconds at a time.
2
Set to scan mode
Press the FUNCTION button to select
3
Start scan playback
Move the selector up
The first 10 seconds of each song will be played one after another.
ÿ
Function mode is automatically canceled after
approximately 30 seconds of scan playback for the first time.
Displayed during scan playback.
Turn scan playback off when the
Four
song (group) you want to hear is played.
If
confirmation function mode has been
canceled, perform step 2 to switch to scan
mode again, and then turn scan playback off.
Move the selector down in scan mode
Press the selector to cancel function mode.
memo
• Scan playback will be canceled if you return to the song (or
group) where you started scan playback.
• If you turn on scan playback during track repeat, the playback
range will switch to group repeat and scan playback will
begin.
scan playback
ÿ
Inside
M
In D
M
listen to
49
Advertisement
