Advertisement
Machine Translated by Google
3
Switch the phase
Operate the selector left and
right.Right : Phase:NOR
(normal phase) Left: Phase:REV (reverse phase)
Can be switched between REV and NOR.
Switch to subwoofer
Four
adjustment mode
Press the AUDIO button
Adjust cutoff
Five
frequency and level
ÿ When selecting the frequency
Operate the selector left and
right.Right: To select a high
frequency.Left: To select a low frequency.
You can choose from 50, 63, 80, 100, 125, 160,
and 200 (Hz).
ÿ When adjusting the level
Move the selector up and down .
Upper: To increase the level.
Lower: To decrease the level.
The level can be adjusted in the range of -24 to +6.
Subwoofer (continued)
6
Set subwoofer slope adjustment
mode
Press the AUDIO button
7
Adjust the slope
Operate the selector left and
right.Right : To decrease the slope
value.Left: To increase the slope value.
The slope can be selected from 6, 12, and 18 (dB/
oct.).
ÿ Press the selector to cancel audio adjustment
mode.
memo
• If the RCA external output setting (ÿ Useful functions!
Page 1103) is set to "P/O:Rear", the subwoofer
function cannot be turned on/off.
•If you turn off the subwoofer function, it will not switch
to subwoofer adjustment mode or subwoofer slope
adjustment mode.
Adjust
75
Advertisement
